Motorized MaltMuncher Pro Grain Mill Homebrew Beer 6lb per minute Adjustable

Description

Upgrade your homebrewery with a complete, fully motorized malt mill that crushes 6 lbs a minute!  Freshness matters and nothing is as fresh as milling grains the day they will be mashed.  The Malt Muncher Pro makes it easy with its built in heavy duty drive motor. Load your malted grains in the hopper, turn the mill on, and enjoy the action and aroma of milling your own malt.
The super convenient stainless stand with tough bamboo base board (no particle board!) allows for a collection bucket to be slid directly underneath. The precise fit between the bucket and stand is designed to contain grain dust.  The bucket features a handle for easily pouring malt into your mashtun and will hold up to 25lbs of milled grain.
The MaltMuncher Pro utilizes the the toughest kind of rollers - cold rolled steel - for longevity.  The gap can be adjusted on both ends for an even, consistent crack. The drive is a heavy duty motor with gear reduction that has plenty of torque for start up yet plenty of speed for a suprising production of 6 pounds per minute.
Features:
Fully motorized with heavy duty gear reduction motor
MaltMuncher two roller mill with 6lb grain chute
Mill 6lbs per minutes
Easy 5 minute assembly
Tough bamboo base board
Stainless frame
Included grain bucket with handle for easy pouring
Cold rolled steel rollers sized at 5" long by 1.25" diameter
Adjustable rollers at both ends to move the gap from .025" - 0.1"
12 TPI knurl to effectively pull grain through the rollers while still leaving the hulls intact to later form an excellent filter during the sparge
The Malt Muncher Pro from Morebeer! crushes 6 lbs of grain per minute.
The stainless stand with polypropylene base board allows for a collection bucket to be slid directly underneath. The precise fit between the bucket and stand is designed to contain grain dust.  The bucket features a handle for easily pouring malt into your mashtun and will hold up to 25 lbs of milled grain.
The MaltMuncher Pro utilizes cold rolled steel rollers for longevity.  The gap can be adjusted on both ends for an even crack. The drive is a heavy duty motor with gear reduction that has plenty of torque for start up.
Features:
Fully motorized with heavy duty gear reduction motor
MaltMuncher two roller mill with 6lb grain chute
Mill 6 lbs per minute
Easy 5 minute assembly
Durable PPE base board
Stainless frame
Included grain bucket with handle for easy pouring
Cold rolled steel rollers sized at 5" long by 1.25" diameter
Adjustable rollers at both ends to move the gap from .025" - 0.1"
12 TPI knurl to effectively pull grain through the rollers while still leaving the hulls intact to later form an excellent filter during the sparge