-40%
ECUMaster III 400 kPa PLUS (DET3-400KPA+)
ECUMaster III 400 kPa PLUS (DET3-400KPA+)
ECUMaster III 400 kPa PLUS (DET3-400KPA+)

ECUMaster III 400 kPa PLUS (DET3-400KPA+)

$ 157.87

Availability: 33 in stock
  • Manufacturer Part Number: DET3-400KPA+
  • Condition: New
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer
  • Brand: ECUMaster
  • Warranty: No Warranty
  • Item must be returned within: 14 Days
  • Restocking Fee: No
  • Returns Accepted: Returns Accepted

    Description

    THE DIGITAL ECU TUNER 3 allows for the removal of the airflow meter on most applications, and can drive up to 4 injectors in batch fire. Ignition timing can be monitored and adjusted via 16×16 tables. The parametric output channels can be configured to control  boost with the use of a boost control solenoid, nitrous activation, water or methanol injection control, etc. Launch control and map switching are also among the advanced features available to the end user. In “Fuel Implant” mode, the DET3 operates much like a standalone ECU, calculating fuel requirements based on RPM, IAT, CLT, TPS and even O2 feedback.
    Technical Details
    Four 16×16 tables (fuel map,two PWM tables, ignition table)
    8 Correction tables, 16×1
    2 Independent switchable map sets
    Built-in MAP sensor, 2.5 bar or 4 bar models available
    Capable of modifying one analog signal
    4 Analog inputs
    Internal datalogging with built-in flash memory
    Battery voltage monitoring
    Supports frequency output air flow meters (for signal modification) 17Hz-4kHz
    Supports VR and Hall effect crank sensors as well as ignition module signals.
    Supports both single ended and differential signals
    Supports all common crank trigger patterns: 60-2, 36-2, 36-1, Multitooth, Ignition Modules and more
    Parametric output can be configured for boost control
    Output for 4 high impedance injectors in batch fire
    ON/OFF parametric output
    Automatic conversion of MAP to MAF with the use of the learning algorithm
    Launch control
    Road dyno
    Supports individual calibration of each analog sensor – device displays values with correct units
    Free firmware updates – new crank trigger patterns and new functionality
    Fuel Implant mode – drive injectors in standalone mode (batch fire)
    USB communication, cable included
    24 month warranty
    PC Requirements
    Windows 2000, XP, Vista, Windows 7, Windows 8
    Screen resolution of at least 1024×768 16bit
    CPU with a clock of at least 600MHz
    USB port
    What’s in the box
    Digital ECU Tuner 3
    USB cable
    Connector
    CD with application and manuals not included:
    https://ecumasterusa.com/pages/software-downloads