DigiBoil Electric Kettle with Mash Upgrade Kit - 35L/9.25G (110V) Beer Brewing

Description

The DigiBoil with Mash Upgrade Kit represents one of the best values in electric all-grain brewing you'll find. This kit includes all of the necessary equipment to mash and boil all in one unit. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash tempearture on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil.
This DigiBoil model has two built-in heating elements that run off a 110V plug. One element is 1000w and the other is 500w for a combined 1500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage both elements to quickly go from mash temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s).
Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach 1/2" FPT fittings if desired.
DigiBoil Features:
304 stainless steel construction
9 gallon total capacity
Digital temperature control
110V / 15A power and plug (5 ft. cord)
Dual heating element control (1000w and 500w)
Heating elements are concealed for easy cleaning
304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2")
Stamped-in volume markers (gallons & liters)
Stainless lid
Temperature reads in °F or °C
With elements turned off, hold both +/- buttons to switch between °F or °C
External Dimensions: 29" H x 15" W (including handles)
Internal Dimensions: 19.5" H x 11.75" W
Mash Upgrade Includes:
False bottom
Malt pipe
Wire support
Malt pipe handle
Malt pipe bottom screen